Lucent Technologies Switch P333T Instrukcja Użytkownika Strona 65

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 82
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 64
Chapter 5 Cajun Campus CLI (Command Line Interface)
Cajun P333T User’s Guide 55
Set spantree enable command
Use the set spantree enable command to enable the spanning-tree algorithm for a
System.
The syntax for this command is:
set spantree enable
Example
This example shows how to enable the spanning-tree algorithm for the system.
Console> (enable)
set spantree enable
bridge spanning tree enabled.
Console> (enable)
Set spantree disable command
Use the set spantree disable command to disable the spanning-tree algorithm for a
System.
The syntax for this command is:
set spantree disable
Example
This example shows how to disable the spanning-tree algorithm for the system.
Console> (enable)
set spantree disable
bridge spanning tree disabled.
Console> (enable)
Set spantree priority command
Use the set spantree priority command to set the bridge priority.
The syntax for this command is:
set spantree priority
[bridge_priority]
Example
This example shows how to set the bridge priority to 4096:
Console> (enable)
set spantree priority
4096
Bridge priority set to 4096.
Console> (enable)
bridge_priority Number representing the priority of the bridge.
The priority level is from 0 to 65535, with 0 indicating high
priority and 65535 indicating low priority.
Przeglądanie stron 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 81 82

Komentarze do niniejszej Instrukcji

Brak uwag